XADO Synthetic Engine Conditioner 125ml – Tribology-Based Oil Additive for Gas & Diesel Engines

Advanced Engine Protection Rooted in Tribology Science

XADO Synthetic Engine Conditioner (125 ml) is a fully synthetic, multi-component oil additive developed on the basis of the latest advances in tribology — the science of friction, wear, and lubrication. Engineered specifically for internal combustion engines, it delivers comprehensive protection to all friction surfaces in gasoline and diesel engines, including turbocharged units, throughout the entire oil service interval.

Unlike one-time treatments, this conditioner remains active from the moment it’s added until the next oil change — continuously improving oil film strength and protecting metal surfaces with every revolution of the engine.

Key Benefits

• Increases Engine Power & Compression — reduced friction losses translate directly to more usable power
• Reduces Noise & Vibration — smoother friction surfaces result in quieter, more refined engine operation
• Lowers Oil Consumption — improved ring sealing reduces blow-by and oil burn-off
• Improves Fuel Economy — less internal friction means the engine works less hard to deliver the same output
• Enhances Motor Oil Properties — boosts the lubricating film strength of your existing oil
• Protects Against Wear — forms a durable protective layer on all engine friction surfaces
• Eases Cold Starts — the conditioner film remains on metal surfaces even after extended downtime, reducing dry-start wear
• Reduces Harmful Emissions — cleaner combustion and better ring sealing lower exhaust toxicity
• Gentle Piston Ring Decarbonization — mild detergent properties dissolve carbon from ring grooves over time

Compatibility

• Gasoline and diesel engines, including turbocharged
• Compatible with synthetic, semi-synthetic, and mineral motor oils
• ⚠ Caution: partial compatibility with ultra-low viscosity oils — 0W-8, 0W-16, 0W-20, and 5W-20. Verify your oil grade before use.

How to Use

1. Warm up the engine to normal operating temperature.
2. Pour the entire 125 ml can into the engine through the oil filler neck.
3. Let the engine idle for 3 minutes to distribute the conditioner through the oil system.
4. Drive normally — the conditioner remains active for the full oil service life.

For maximum long-term protection, use with every oil change.

Dosage & Packaging

• Volume: 125 ml (1 can)
• Optimal dose: 3% of total oil volume — 1 can for approximately 4 liters of oil
• Maximum dose: up to 4.5% of oil volume (50% overdose tolerance)